Call us Toll Free at (800) 658-8014
D.L. Ricci Corporation
Hand Hole Grinders
Journal Turning Lathes
Keyway Cutters
Oval Manway Seat Grinder
Plasma Systems
Portable Boring Bars
Portable Mills
Rapid End Prep Lathes
Tube and Pipe
Cut Off Saw
Tube Squaring Systems
Z Axis Milling
Hand Hole Grinder

The combination of speed and ease of setup allow this Hand Hole Grinder to out perform all other methods of repairing existing, worn, abraded and leaking hand hole sealing surfaces. The unique roller arrangement permits effortless contouring of "out-of-round" hand holes by following the existing shape.

Truing the grinder to an existing hole is accomplished by turning the four adjusting screws and aligning the stone to the adjacent sealing surface. The thumb wheel micro feed adjusts the proper depth-of-cut, so that minimal amounts of material are removed during the grinding process.

Size (Dia) Grinding Wheel
2 2-1/4 2-1/2 2-3/4
1-7/16 9/32 13/32 17/32 21/32
1-1/2 1/4 3/8 1/2 5/8
1-9/16 7/32 11/32 15/32 19/32
1-5/8 3/16 5/16 7/16 9/16
To receive more information about the above products, please call, fax, e-mail or use our Inquiries page
[Airetool] [ATP/OZAT] [D.L. Ricci] [E-Pro Gaskets] [Evolution Power Tools] [EZEBend]
[FASTORQ] [Francis Torque Tools] [Henry Air Tools] [H&S Tool] [HTI] [Industrial Tools] [Magnetec]
[Michigan Pneumatic] [Pearl Abrasive] [Quality Pneumatic & Electric Tools] [Simplex] [Specialty Tools] [Trumpf]
[Home] [Inquiries] [E-mail]
Tools for Industry Inc.,
812 Oceola Drive, P.O. Box 7555, Algonquin IL. 60102
Phone: (847) 658-0455, Fax: (847) 658-4555, Toll Free: (800) 658-8014, E-mail: