Heat Exchanger/Condenser Tube Cleaners

Airetool Clean Tubes Equal Higher Efficiency
All piping, heat exchanger and boiler tubes accumulate scale over various periods of use. This scale decreases flow, retards heat transfer, and consequently increases fuel
consumption and lowers efficiency.

Heat Exchanger & Condenser Tube Cleaners

• Complete cleaner consists of an air motor with integral water feed valve couplings; up to 22 ft. of shafting with necessary couplings (please specify shaft length required); motor shaft wrench and an extra set of motor blades. • The CC 475 Cleaner Complete also includes two drills of any type or size up to 1", three spiral brushes up to 1" and 15 feet of 3/8 inch water hose. • CC-375-1, 325-1 & 325-HP: Includes Ball bearing trolley and rope block. › Specifications

Water Feed Attachment - WF 100

• For use with air drills. Available with various size coupling drives. • Input and output drive thread: 5/8-18 UNF. • Water inlet: 3/8 NPT. • WF-107 Adapter required, 1/2 shank with 3 flats for drill chuck.

Airetool Shafting

› Specifications

Brush-Master Tube Cleaners

Tube cleaners for condensers, chillers, evaporators and other tubular heat transfer apparatus. • Variable solid state speed control from 0 to 1750 RPM with constant torque. • Manifold for screw-on style shafting that is commonly used in competitive models. • 3/16" ID to 3"OD › Specifications