Steel 2 - 15" TCT Steel Cutting Circular Chop Saw

This superb Cut Off Saw cuts through mild steel without heat, burrs or coolant. Utilizing a powerful 2200-watt motor, the STEEL SAW 2 can handle even the most demanding everyday jobs. The STEEL SAW 2 slices its way through mild steel with ease, the cut is extremely quick and clean. The cutting capacity is incredible too – 4-3/4” x 4-3/4” steel box section with a 1/4” wall thickness. This no-nonsense machine is economical in its performance as well; typically a STEEL SAW 2 blade averages a jaw-dropping 1000 cuts in 2” x 2” mild steel with a wall thickness of 1/8”.

•	Amazing Evolution 380 Raptor cut off saw with a 15" diameter TCT blade.
•	Designed to cut steel, aluminum, and stainless steel without heat, burrs or coolant.
•	Powerful 2200 watt 1300rpm motor copes with the heaviest of work. Earth grounded.
•	Maximum box cutting capacity 4-3/4" x 4-3/4" and wall thickness 1/4".
•	Long life blade averages 800 cuts of 2" x 2" and wall thickness 1/8" mild steel.
•	Includes, blade guard, operators manual, and goggles.
•	High quality construction.
	› Specifications

This incredible cut off saw comprehensively out-performs abrasive saws. Featuring patented RAGE® technology, utilizing a TCT blade rather than an abrasive wheel. Plus it has the ability to cut Steel, Aluminum and Wood with a single blade. The cut is fast, clean with no burr and virtually no sparks. When cutting steel, the RAGE2 cuts cold, no coolant is required, and because the material is cold it can be handled and worked on immediately. The impressive performance is economical too, offering up to 750 cuts in mild steel box section* before a replacement blade is needed.

•	Patented RAGE technology: Cuts Steel, Aluminum, Wood & Plastics easily without compromise.
•	Faster and cleaner cuts than an abrasive saw. The RAGE 2 leaves no burr and offers an instantly workable finish.
•	Economical performance, the RAGE blade system will produce up to 750 cuts in mild steel box section.
•	No coolant required and virtually no sparks are produced.
•	Fast action swivel clamp enables cuts from 0-45º.
•	The Hi-torque gearbox reduces motor stresses, improving performance and durability.
•	High quality construction.
•	Blade included, eye and ear protection included.
•	V-clamp included for easy clamping of bar and box section.
	› Specifications

This incredible cut off saw is the perfect machine to use when tackling robust applications. The FURY2 easily cuts Steel, Aluminum and Wood (even wood
with nails), using just one blade and demonstrates more than generous cutting capacities.

Offering a maximum cutting depth of 4-3/4” and a 7” cutting width this saw provides a solution to a multitude of applications.

When cutting steel the FURY2 cuts cold, without the need for coolant and because the material is cold it can be handled and worked on immediately. The cut is fast, clean, and accurate, producing no burr and very few sparks.

•	Fast action swivel work clamp for angled cuts from 0-45°
•	Powerful 1800w motor.
•	Cuts Steel, Aluminum, Wood & Plastic.
•	Faster and cleaner cuts than an abrasive wheel.
•	No coolant required and produces virtually no sparks.
•	Doesn't lose depth of cut during use, unlike an abrasive wheel.
•	Offers an instantly workable finish.
•	High quality construction.
	› Specifications

Easier to use than a hacksaw and far more portable than a cut off saw; the award winning RAGE4 Advan-Saw will easily cut Steel, Aluminum, Wood and Plastic, using just one blade. Utilizing RAGE® technology the cut is fast and clean. When cutting steel the machine cuts cold (no coolant is required) producing no burr and very few sparks, leaving the material instantly workable. The RAGE4 is the perfect tool for slicing through rebar, bolt trimming and other small awkward applications; plus it has the ability to cut through a 2 by 4 with nails and screws.

•	Patented RAGE technology: Cuts Steel, Aluminum, Wood & Plastics easily without compromise.
•	Fast and clean cutting performance, the RAGE4 leaves no burr and offers an instantly workable finish.
•	Easier to use than a hacksaw, far more portable than a cut off saw.
•	Extremely portable and very tough, ideal for site use.
•	No coolant required when cutting steel and virtually no sparks are produced.
•	Fast action swivel clamp enables cuts from 0-45º.
•	The Hi-torque gearbox reduces motor stresses, improving performance and durability.
•	Blade included, eye and ear protection included.
•	High quality construction.
	› Specifications