Quality Pneumatic & Electric Industrial Tools Product Line

Magnetic Drills
AirBor Magnetic Drill, Model 9052EX, 1HP Pneumatic, 500 RPM
Magnetic Drill with 8 Amp / 110V electric motor. 450 RPM
Magnetic Drill with 10 Amp / 110V electric motor. 375 RPM
Magnetic Drill with Fail-Safe magnet, 6 Amp / 110V electric motor. 375 RPM
Magnetic Drill with 16 Amp / 110V electric motor. 50 - 450 RPM
Magnetic Drill model SE85-32 with swivel base
1/2" Chuck Adapter for twist drills.
5/8" Chuck with #3 Morse Taper, for E85-32, SE85-32 and ECO 100/3
Note: Above drills include carrying case, except SE85S-32. Electric units also available in 220 Volt.

Unibroach Annular Cutters, High quality M2 High Speed Steel or tough M42 steel.
See Accessory Price List

Portable Band Saws, Air and Electric
Air Band Saw, 4-3/4" cutting capacity
Electric Band Saw, 4-3/4" cutting capacity
Clamp-On Vise for Band Saw models 5 6003 and 5 6004
Deep Throat Pneumatic Band Saw, 7-1/4" cutting capacity
Deep Throat Electric Band Saw, 7-1/4" cutting capacity

Saw Blades for Band Saws

Air Saws, Reciprocating and Hacksaw

Reciprocating Saw Blades (5 per pack)

Air Chain Saws
Air Chain Saw, 10" Utility
Air Chain Saw, 17"
Air Chain Saw, 21"
Air Chain Saw, 25"
Underwater Air Chain Saw, 21"
Underwater Air Chain Saw, 25"

Replacement Chains and Accessories for Air Chain Saws

Air Concrete Saws
14" Hand-Held Air Cut-off Saw
14" Walk-Behind Concrete Saw
14" Diamond Blade (Wet-Cut)
Cart for CS-100

Air Tools
Air Drill, variable speed, 90 - 850 RPM, .75, 1/2" Capacity
Air Hammer Drill, .75 HP, 1/2" capacity, 2,200 BPM
Air Nut Runner, 7/8" Female Square Drive
Air Nut Runner with 3/4" Male Square Drive
Air Nut Runner with 1/2" Male Square Drive
Air Pac, 2-tool connections (removes moisture from air line)
Air Jig Saw

Air Movers & Axial Fans, Air Driven (Explosion Proof)

Axial Fans, Electric Driven (1 Ph., 110V, 60 Hz)

Dry Core Drilling Machine
Hand-Held Dry Diamond Core Drill, Electric, 12 Amp, 0 - 2,000 RPM, 7 lbs.
Includes slip clutch and 5/8" x 11 UNC connecting threads and metal case.

Wet Core Drilling Machines (Electric and Pneumatic)
Hand-Held Core Drill, Electric, 17.6 Amp, 1440 RPM, 15 lbs.
Hand-Held Core Drill, Electric, 15 Amp, 1,000 & 2,000 RPM, 14 lbs.
Hand-Held Core Drill, Electric, 17.6 Amp, 450 - 1080 - 2100 RPM, 18 lbs.
Core Drill, Electric, 11 Amp, variable speed (350 - 4,600 RPM), 10 lbs.
Hand-Held Core Drill, Pneumatic, 2.1 HP, 350 - 500 - 1500 RPM, 18 lbs.
Hand-Held Core Drill, Pneumatic, 3.8 HP, 190 - 420 - 805 RPM, 21 lbs.

All above unites include slip clutch, water swivel, GFI protective switch and
connecting threads 5/8" x 11 and 1-1/4" x 7 UNC

Hand-Held Core Drills are intended for hand-held drilling up to 3" diameter.
For drilling hole sizes larger than 3" diameter, use a Drill Stand. See Below.

Drill Rigs, Complete with Anchor Stand

Combination Drill Rigs, Complete with Anchor Stand and Vacuum Pump

Core Drilling Accessories & Spares

Surface Sanding & Polishing Tools
Surface Finishing Machine, Electric, 11 Amp, 1200 - 3700 RPM
Surface Finishing Machine, LP 1503 VR w/pneumatic wheel & acces.
Surface Finishing Machine, Pneumatic, 90 PSI, 2500 RPM
Surface Finishing Machine, LP 1503 AIR w/pneumatic wheel & acces.
Weld Seam Grinder, Electric, 11 Amp, 33 - 98 Ft/Min.
Finger Sander, Electric, 4.5 Amp, 2,500 - 10,000 Stroke / Min.

Angle Grinders / Polishers / Sanders
Angle Grinder, 4-1/2", 5.5 Amp, 2,000 - 6,500 RPM
Angle Grinder, 4-1/2", 6.6 Amp, 10,000 RPM
Angle Grinder, 4-1/2", Pneumatic, 90 PSI, 6,500 RPM
Polishing Machine, 5", 11 Amp., 1,000 - 3,200 RPM, 5/8" spindle thread
Angle Grinder, 5" w/Feedback Motor, 11 Amp., 10,000 RPM
Variable Speed Angle Grinder, 5", 11 Amp., 2,000-6,500 RPM
Angle Grinder, 4-1/2", w/Dust Extraction, 11 Amp., 2,000 - 6,500 RPM
Polishing Machine, 2" - 7-1/4" dia., 5-1/2 Amp, 800 - 2000 RPM
Polishing Machine, 9", 13.6 Amp, 800 - 2,400 RPM
Orbital Sander, 6.6 Amp., 6,500 - 13,000 RPM

Slotting, Tuck-Pointing and Masonry Tools
Wall Slotter, 11 Amp., 7/8" x 1-3/16", with two 5-1/4" diamond blades
Tile Cutter, 11 Amp., up to 1-1/4", with one 5-1/4" diamond blade
Joint Cutter, 11 Amp., up to 1" depth (without diamond blade)
Joint Pin Grinder, 4.1 Amp, w/one Diamond Pin Cutter, 3/8" dia. (250.485)
Concrete Grinder, 11 Amp., with 5" Diamond Grinding Wheel (253.115)

All models include metal carrying case, except as noted.

Accessories for Tuck Pointing

Vacuum/Dust Extractor
Vacuum/Dust Extractor, Wet or Dry
CS 34 K Filter Bags, 5 pack
CS 34 K Stepped Adapter (for hose connection to vacuum port on power totals)
CS 34 K Filter Cassette

Grinder / Sander / Drill Accessories for Dust Extraction
Dust Extraction Guard, 4-1/2" semi enclosure, 1-7/8" ID flange, nylon brush collar
Dust Extraction Guard, 5", full enclosure, 1-7/8" ID flange
Dust Extraction Set, 4-1/2", includes 252.682, bronze brush collar, cable clips and accessories
Drill Dust Collection Kit, 5/8" capacity

Hand-Held Mixers

Wet Natural Stone Tools

Nibblers
Electric Nibbler, 20 Amp, 1/4" (.250") gauge
Punch, 1.4", for K 27650 C
Die, for K 2765 C
Die, for Aluminum Plate, for K 2765 C
Electric Nibbler, 15 AMP / 110V, capacity .375"
Pneumatic Nibbler, 4 HP / 90 PSI / 100 CFM, capacity .375"