Call us Toll Free at (800) 658-8014
search
Quality Pneumatic &
Electric Industrial Tools
Angle Grinders
Beveling Machines
Concrete Chain Saws
Non-Sparking, Non-Magnetic Safety Tools
Pneumatic Cut-Off Saws
Portable Band Saws
Portable Hacksaws
Portable Magnetic Drills
Reciprocating Saws
Steel Cutting Circular Saws
Surface Finishing
Unibroach Annular Cutters
More
Complete Product Listing
 
Unibroach Annular Cutters
 
For use with Airbor™, Hougen, Jancey and similar machines.
Unibroach M42 drills are made for the toughest hole-cutting operations throughout industry; for shop or on-site drilling of virtually any metal; for manufacture of machine tools and other machinery or consumer products; for all automotive, marine and air transportation equipment: for all construction applications, including steel yard or job-site drilling of structural steel; for building of bridges, refineries and chemical plants and all process lines and equipment;for oil field, pipeline and utility maintenance and construction.
 
Features
Standard material is M42 steel (8% Cobalt) which is much tougher than the M2 high speed steel typically used for this type of annular cutter
Unibroach drills have more cutting teeth, which reduces individual tooth loading.
Cut holes easier, more efficiently in tough-to-cut metals, such as stainless steels.
3/4" diameter shanks: use Hougen, Jancy, Bosch, Black & Decker and similar magnetic drilling machines with 3/4" arbor collets. Or use our Morse Taper arbors to adapt to a wide variety of production-line machine tools. 
Available with Weldon shanks for additional machine adaptability.
Fractional and metric sizes:  Standard sizes up to  2-1/16" diameter for 1", 2" and 3" hole depths, and up to 80mm diameter for 25mm and 50mm hole depths.
 
Specifications
Standard Sizes Hole Depth Diameter Size Increments
Fractional:

1"
2"
3"

7/16 to 2-1/16
7/16 to 2-1/16
3/4 to 2-1/16
1/16
1/16
1/16
Metric: 25 mm
50 mm
12 mm to 52 mm
12 mm to 80 mm
1 mm
1 mm

Sizes not listed are available; call for details
Arbor description: Morse Taper sizes: 2, 3 and 4
Pilots: 1" and 2" pilots for 7/16" dia.: 1" and 2" pilots for all others

Armor Plated Unibroach Cutters
Armor Plated Unibroach Cutters drill faster and last up to four times longer than traditional high-speed steel cutters. Multiple layers of Titanium Aluminum Nitride coat the cutter surface and protect it from wear while lowering the coefficient of friction, thereby greatly reducing the heat generated.

Features
3 to 4 times longer tool life with TiAlN coating
Drill with less friction and more power
Withstands higher working temperatures – up to 1480°F (800°C)
Dry drilling or lubricating with water simplifies working conditions and cleanup*
Prevents cold weld – metal chips do not adhere to the cutter
Ideal for structural steel and hard metal
3/4" dia. shank (1-1/4" dia. shank available)

* After the TiAIN coating is worn, lubricate with cutting oil

Tungsten Carbide Tipped (TCT) Unibroach Cutters
Available in the following sizes:
1" drill depth — 5/8" to 2 " dia.
2" drill depth — 11/16 " to 5" dia.
3" drill depth — 13/16 " to 2" dia.

Features
Use high-speed RPM for best results and faster holemaking
Ideal for drilling steel with rust or paint
Will outlast High-speed Steel cutters
Leaves a burr-free finished hole
Available in all sizes (fractional and metric)
3/4" or 1-1/4" shank
 
To receive more information about the above products, please call, fax, e-mail or use our Inquiries page
 
[Airetool] [ATP/OZAT] [D.L. Ricci] [E-Pro Gaskets] [Evolution Power Tools] [EZEBend]
[FASTORQ] [Francis Torque Tools] [Henry Air Tools] [H&S Tool] [HTI] [Industrial Tools] [Magnetec]
[Michigan Pneumatic] [Pearl Abrasive] [Quality Pneumatic & Electric Tools] [Simplex] [Specialty Tools] [Trumpf]
[Home] [Inquiries] [E-mail]
 
Tools for Industry Inc.,
812 Oceola Drive, P.O. Box 7555, Algonquin IL. 60102
Phone: (847) 658-0455, Fax: (847) 658-4555, Toll Free: (800) 658-8014, E-mail: TFIinc1@aol.com